Applications
- Water abstraction from boreholes, reservoirs and water courses.
- Domestic water supply.
- Agricultural irrigation and gardens.
- Hydropneumatic systems.
Technical Data
| Type | Multistage centrifugal pump |
|---|---|
| Material | Noryl or Polycarbonate impellers |
| Installation | Vertical / Horizontal |
| Diameter | 4" (~98mm) |
| Sand Fighter® | Up to 150g/m³ |
| Voltage | 230 V (1~) / 400 V (3~) |
|---|---|
| Max Temperature | 35° C |
| Starts/Hour | Maximum 20 starts per hour |
| Discharge | 1" 1/4 - 2" |
| Pos. | Description |
|---|---|
| 1 | Pin |
| 2 | Screw |
| 3 | Clamp |
| 4 | Cable guard |
| 5 | Protection rubber |
| 6 | Nut |
| 7 | Tie rod |
| 8 | Support hook |
| 9 | Upper support / Discharge head |
| 10 | Valve guide |
| 11 | Valve |
| 12 | O'ring |
| 13 | Valve seat |
| 14 | Circlip/Snap ring |
| 15 | Washer |
| 16 | Upper guide bushing |
| 17 | Upper guide |
| 18 | Upper guide ring |
| 19 | Diffuser |
| 20 | Diffuser ring |
| 21 | Impellers |
| 22 | Diffuser cover |
| 23 | Bushing |
| 24 | Central guide bushing |
| 25 | Central guide |
| 26 | Central guide ring |
| 27 | Lower bushing |
| 28 | Suction chamber |
| 29 | Coupling |
| 30 | Screw |
| 31 | Pump shaft |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 41 08 | 0.25 | 3.2 | 10.8 | — |
| 41 13 | 0.37 | 4.2 | 12.4 | 11.1 |
| 41 18 | 0.55 | 5.4 | 14.8 | 13.3 |
| 41 23 | 0.75 | 6.3 | 16.9 | 15.2 |
| 41 35 | 1.1 | 9 | 21 | 19.4 |
| 41 45 | 1.5 | 11.9 | 25.2 | 23.5 |
| 41 65 | 2.2 | 16.2 | 33.9 | 31.5 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 41.5 07 | 0.25 | 3.2 | 10.8 | — |
| 41.5 09 | 0.37 | 3.6 | 11.8 | 11 |
| 41.5 15 | 0.55 | 4.3 | 13.7 | 12.2 |
| 41.5 19 | 0.75 | 5.6 | 16.2 | 14.5 |
| 41.5 29 | 1.1 | 7.6 | 19.6 | 18 |
| 41.5 38 | 1.5 | 9.7 | 22.8 | 21.1 |
| 41.5 58 | 2.2 | 14.5 | 32.2 | 29.9 |
| 41.5 74 | 3 | 17.7 | — | 35.1 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 42 07 | 0.37 | 3.9 | 11.4 | 10.6 |
| 42 11 | 0.55 | 3.9 | 13.3 | 11.8 |
| 42 14 | 0.75 | 4.2 | 14.8 | 13.3 |
| 42 21 | 1.1 | 6.2 | 18.2 | 16.6 |
| 42 27 | 1.5 | 7.1 | 20.2 | 18.5 |
| 42 39 | 2.2 | 10 | 27.5 | 22.8 |
| 42 50 | 3 | 13 | — | 30.4 |
| 42 70 | 4 | 17.9 | — | 38.1 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 43 06 | 0.37 | 3.2 | 11.4 | 10.6 |
| 43 09 | 0.55 | 3.8 | 13.2 | 11.7 |
| 43 12 | 0.75 | 4.5 | 15.1 | 13.4 |
| 43 18 | 1.1 | 6 | 18 | 16.4 |
| 43 24 | 1.5 | 8.5 | 21.6 | 19.9 |
| 43 35 | 2.2 | 10 | 27.5 | 22.8 |
| 43 47 | 3 | 12.8 | — | 30.2 |
| 43 60 | 4 | 16.8 | — | 37.2 |
| 43 78 | 5.5 | 21 | — | 48 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 44 05 | 0.37 | 3 | 11.2 | 10.4 |
| 44 07 | 0.55 | 3.4 | 12.8 | 11.3 |
| 44 09 | 0.75 | 3.8 | 14.4 | 12.7 |
| 44 14 | 1.1 | 4.9 | 16.9 | 15.3 |
| 44 18 | 1.5 | 6 | 19.1 | 17.4 |
| 44 26 | 2.2 | 7.7 | 25.2 | 20.5 |
| 44 35 | 3 | 10 | — | 27.2 |
| 44 47 | 4 | 13 | — | 33.4 |
| 44 60 | 5.5 | 16 | — | 43 |
| 44 78 | 7.5 | 20.2 | — | 51.2 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 46 04 | 0.55 | 2.9 | 12.3 | 10.8 |
| 46 06 | 0.75 | 3.5 | 14.1 | 12.4 |
| 46 09 | 1.1 | 4.5 | 16.5 | 14.9 |
| 46 12 | 1.5 | 5.5 | 18.6 | 16.9 |
| 46 17 | 2.2 | 6.8 | 24.3 | 19.6 |
| 46 23 | 3 | 8.7 | — | 25.9 |
| 46 31 | 4 | 11.2 | — | 31.6 |
| 46 42 | 5.5 | 14.3 | — | 41.3 |
| 46 59 | 7.5 | 20.1 | — | 51.1 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 48 04 | 0.75 | 3 | 13.6 | 11.9 |
| 48 07 | 1.1 | 3.6 | 15.6 | 14 |
| 48 09 | 1.5 | 4.3 | 17.4 | 15.7 |
| 48 13 | 2.2 | 5.7 | 23.2 | 18.5 |
| 48 17 | 3 | 6.8 | — | 22 |
| 48 23 | 4 | 8.5 | — | 28.7 |
| 48 31 | 5.5 | 11 | — | 38 |
| 48 42 | 7.5 | 14.2 | — | 45.2 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 410 05 | 1.1 | 4.1 | 16.1 | 14.5 |
| 410 07 | 1.5 | 5 | 18.1 | 16.4 |
| 410 10 | 2.2 | 6.5 | 24 | 19.3 |
| 410 15 | 3 | 9 | — | 24.2 |
| 410 20 | 4 | 11.7 | — | 32.1 |
| 410 26 | 5.5 | 14 | — | 41 |
| 410 35 | 7.5 | 18 | — | 49 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 412 04 | 1.1 | 3.7 | 15.7 | 14.1 |
| 412 06 | 1.5 | 4.5 | 17.6 | 15.9 |
| 412 09 | 2.2 | 6.1 | 23.6 | 18.9 |
| 412 12 | 3 | 7.4 | — | 22.6 |
| 412 16 | 4 | 9.4 | — | 29.8 |
| 412 22 | 5.5 | 12.4 | — | 39.4 |
| 412 29 | 7.5 | 15.5 | — | 46.5 |
| Model | kW | BJ (kg) | FM (kg) | FT (kg) |
|---|---|---|---|---|
| 415 05 | 1.5 | 4 | 17.1 | 15.4 |
| 415 08 | 2.2 | 5.3 | 22.8 | 18.1 |
| 415 10 | 3 | 6.5 | — | 21.7 |
| 415 14 | 4 | 8.5 | — | 28.7 |
| 415 18 | 5.5 | 10.8 | — | 37.8 |
| 415 25 | 7.5 | 14.2 | — | 45.2 |
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | |||||
|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | |
| 0,25 | 0,33 | — | 45,0 | 39,0 | 29,0 | 15,0 | |
| 0,37 | 0,50 | — | 73,0 | 64,0 | 47,0 | 24,0 | |
| 0,55 | 0,75 | — | 101,0 | 88,0 | 65,0 | 33,0 | |
| 0,75 | 1,00 | — | 129,0 | 112,0 | 83,0 | 42,0 | |
| 1,10 | 1,50 | — | 196,0 | 171,0 | 126,0 | 65,0 | |
| 1,50 | 2,00 | — | 252,0 | 220,0 | 162,0 | 83,0 | |
| 2,20 | 3,00 | — | 364,0 | 318,0 | 234,0 | 120,0 | |
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | ||||||
|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | |
| 0,25 | 0,33 | — | 44,0 | 40,0 | 34,0 | 25,0 | 15,0 | |
| 0,37 | 0,50 | — | 56,0 | 51,0 | 43,0 | 33,0 | 19,0 | |
| 0,55 | 0,75 | — | 94,0 | 85,0 | 72,0 | 55,0 | 32,0 | |
| 0,75 | 1,00 | — | 119,0 | 107,0 | 91,0 | 69,0 | 40,0 | |
| 1,10 | 1,50 | — | 181,0 | 164,0 | 140,0 | 106,0 | 61,0 | |
| 1,50 | 2,00 | — | 237,0 | 215,0 | 183,0 | 138,0 | 79,0 | |
| 2,20 | 3,00 | — | 362,0 | 328,0 | 279,0 | 211,0 | 120,0 | |
| 3,00 | 4,00 | — | 462,0 | 418,0 | 356,0 | 269,0 | 151,0 | |
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | |
| 0,37 | 0,50 | — | 45,0 | 43,0 | 40,0 | 36,0 | 31,0 | 24,0 | 16,0 | |
| 0,55 | 0,75 | — | 71,0 | 68,0 | 63,0 | 57,0 | 49,0 | 39,0 | 25,0 | |
| 0,75 | 1,00 | — | 90,0 | 86,0 | 80,0 | 72,0 | 62,0 | 49,0 | 31,0 | |
| 1,10 | 1,50 | — | 135,0 | 129,0 | 120,0 | 108,0 | 93,0 | 73,0 | 47,0 | |
| 1,50 | 2,00 | — | 173,0 | 166,0 | 154,0 | 139,0 | 120,0 | 93,0 | 60,0 | |
| 2,20 | 3,00 | — | 250,0 | 240,0 | 223,0 | 201,0 | 173,0 | 135,0 | 86,0 | |
| 3,00 | 4,00 | — | 321,0 | 307,0 | 286,0 | 257,0 | 221,0 | 173,0 | 111,0 | |
| 3,70 | 5,00 | — | 411,0 | 393,0 | 366,0 | 329,0 | 283,0 | 221,0 | 142,0 | |
| 4,00 | 5,50 | — | 450,0 | 430,0 | 400,0 | 360,0 | 310,0 | 242,0 | 155,0 | |
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | |
| 0,37 | 0,50 | — | 40,0 | 36,0 | 34,0 | 31,0 | 27,0 | 22,0 | 16,0 | 9,0 | ||
| 0,55 | 0,75 | — | 60,0 | 54,0 | 50,0 | 47,0 | 41,0 | 34,0 | 24,0 | 14,0 | ||
| 0,75 | 1,00 | — | 80,0 | 72,0 | 67,0 | 62,0 | 55,0 | 45,0 | 32,0 | 19,0 | ||
| 1,10 | 1,50 | — | 120,0 | 108,0 | 101,0 | 93,0 | 82,0 | 67,0 | 48,0 | 28,0 | ||
| 1,50 | 2,00 | — | 160,0 | 144,0 | 134,0 | 124,0 | 110,0 | 90,0 | 65,0 | 38,0 | ||
| 2,20 | 3,00 | — | 234,0 | 210,0 | 196,0 | 181,0 | 160,0 | 131,0 | 94,0 | 55,0 | ||
| 3,00 | 4,00 | — | 314,0 | 282,0 | 263,0 | 243,0 | 215,0 | 176,0 | 127,0 | 74,0 | ||
| 3,70 | 5,00 | — | 367,0 | 330,0 | 307,0 | 285,0 | 251,0 | 206,0 | 148,0 | 87,0 | ||
| 4,00 | 5,50 | — | 401,0 | 360,0 | 335,0 | 311,0 | 274,0 | 225,0 | 162,0 | 95,0 | ||
| 5,50 | 7,50 | — | 521,0 | 468,0 | 436,0 | 404,0 | 356,0 | 292,0 | 210,0 | 123,0 | ||
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | |
| 0,37 | 0,50 | — | 33,0 | 32,0 | 31,0 | 29,0 | 27,0 | 25,0 | 23,0 | 19,0 | 16,0 | 12,0 | ||
| 0,55 | 0,75 | — | 46,0 | 44,0 | 43,0 | 41,0 | 38,0 | 36,0 | 32,0 | 27,0 | 22,0 | 17,0 | ||
| 0,75 | 1,00 | — | 60,0 | 57,0 | 55,0 | 53,0 | 49,0 | 46,0 | 41,0 | 35,0 | 28,0 | 21,0 | ||
| 1,10 | 1,50 | — | 93,0 | 89,0 | 86,0 | 83,0 | 77,0 | 71,0 | 64,0 | 54,0 | 44,0 | 33,0 | ||
| 1,50 | 2,00 | — | 119,0 | 114,0 | 110,0 | 106,0 | 99,0 | 91,0 | 82,0 | 70,0 | 56,0 | 42,0 | ||
| 2,20 | 3,00 | — | 172,0 | 165,0 | 159,0 | 153,0 | 143,0 | 132,0 | 119,0 | 101,0 | 81,0 | 61,0 | ||
| 3,00 | 4,00 | — | 232,0 | 222,0 | 214,0 | 206,0 | 192,0 | 178,0 | 160,0 | 136,0 | 109,0 | 83,0 | ||
| 3,70 | 5,00 | — | 284,0 | 273,0 | 263,0 | 254,0 | 236,0 | 218,0 | 196,0 | 166,0 | 135,0 | 101,0 | ||
| 4,00 | 5,50 | — | 311,0 | 298,0 | 287,0 | 277,0 | 258,0 | 239,0 | 215,0 | 182,0 | 147,0 | 111,0 | ||
| 5,50 | 7,50 | — | 397,0 | 381,0 | 367,0 | 354,0 | 329,0 | 305,0 | 274,0 | 232,0 | 188,0 | 142,0 | ||
| 7,50 | 10,00 | — | 516,0 | 495,0 | 477,0 | 460,0 | 428,0 | 396,0 | 356,0 | 302,0 | 244,0 | 184,0 | ||
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7.2 | 8.4 | 9.6 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | |
| 0,55 | 0,75 | — | 27,0 | 25,0 | 25,0 | 24,0 | 23,0 | 22,0 | 21,0 | 20,0 | 17,0 | 13,0 | 9,0 | ||||
| 0,75 | 1,00 | — | 40,0 | 38,0 | 37,0 | 36,0 | 35,0 | 33,0 | 31,0 | 29,0 | 25,0 | 20,0 | 14,0 | ||||
| 1,10 | 1,50 | — | 60,0 | 57,0 | 56,0 | 54,0 | 52,0 | 50,0 | 47,0 | 44,0 | 38,0 | 30,0 | 20,0 | ||||
| 1,50 | 2,00 | — | 80,0 | 76,0 | 74,0 | 72,0 | 69,0 | 66,0 | 62,0 | 59,0 | 50,0 | 39,0 | 27,0 | ||||
| 2,20 | 3,00 | — | 114,0 | 108,0 | 105,0 | 102,0 | 98,0 | 94,0 | 88,0 | 83,0 | 71,0 | 56,0 | 38,0 | ||||
| 3,00 | 4,00 | — | 154,0 | 146,0 | 142,0 | 138,0 | 133,0 | 127,0 | 119,0 | 112,0 | 96,0 | 76,0 | 52,0 | ||||
| 3,70 | 5,00 | — | 187,0 | 178,0 | 173,0 | 168,0 | 161,0 | 154,0 | 145,0 | 137,0 | 117,0 | 92,0 | 63,0 | ||||
| 4,00 | 5,50 | — | 207,0 | 197,0 | 192,0 | 186,0 | 179,0 | 171,0 | 161,0 | 151,0 | 129,0 | 102,0 | 70,0 | ||||
| 5,50 | 7,50 | — | 281,0 | 267,0 | 260,0 | 252,0 | 242,0 | 231,0 | 218,0 | 205,0 | 175,0 | 138,0 | 95,0 | ||||
| 7,50 | 10,00 | — | 395,0 | 375,0 | 365,0 | 354,0 | 340,0 | 325,0 | 306,0 | 288,0 | 246,0 | 194,0 | 133,0 | ||||
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7.2 | 8.4 | 9.6 | 10.8 | 12 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | 180 | 200 | |
| 0,75 | 1,00 | — | 27,0 | 26,0 | 26,0 | 25,0 | 25,0 | 24,0 | 23,0 | 22,0 | 19,0 | 16,0 | 13,0 | 8,0 | |||||
| 1,10 | 1,50 | — | 47,0 | 46,0 | 45,0 | 45,0 | 44,0 | 43,0 | 41,0 | 38,0 | 33,0 | 28,0 | 22,0 | 15,0 | |||||
| 1,50 | 2,00 | — | 61,0 | 59,0 | 58,0 | 57,0 | 56,0 | 55,0 | 53,0 | 49,0 | 43,0 | 36,0 | 29,0 | 19,0 | |||||
| 2,20 | 3,00 | — | 88,0 | 85,0 | 84,0 | 83,0 | 81,0 | 79,0 | 76,0 | 70,0 | 62,0 | 53,0 | 41,0 | 27,0 | |||||
| 3,00 | 4,00 | — | 115,0 | 111,0 | 110,0 | 108,0 | 106,0 | 103,0 | 100,0 | 92,0 | 81,0 | 69,0 | 54,0 | 36,0 | |||||
| 3,70 | 5,00 | — | 142,0 | 137,0 | 135,0 | 133,0 | 131,0 | 128,0 | 123,0 | 114,0 | 100,0 | 85,0 | 67,0 | 44,0 | |||||
| 4,00 | 5,50 | — | 156,0 | 150,0 | 148,0 | 146,0 | 143,0 | 140,0 | 135,0 | 124,0 | 110,0 | 93,0 | 73,0 | 48,0 | |||||
| 5,50 | 7,50 | — | 210,0 | 202,0 | 200,0 | 197,0 | 193,0 | 188,0 | 182,0 | 168,0 | 148,0 | 125,0 | 98,0 | 65,0 | |||||
| 7,50 | 10,00 | — | 284,0 | 273,0 | 271,0 | 268,0 | 262,0 | 255,0 | 247,0 | 227,0 | 200,0 | 170,0 | 133,0 | 88,0 | |||||
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7.2 | 8.4 | 9.6 | 10.8 | 12 | 15 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | 180 | 200 | 250 | |
| 1,10 | 1,50 | — | 33,0 | 30,0 | 30,0 | 29,0 | 29,0 | 28,0 | 27,0 | 25,0 | 23,0 | 20,0 | 18,0 | 10,0 | ||||||
| 1,50 | 2,00 | — | 47,0 | 43,0 | 42,0 | 41,0 | 40,0 | 39,0 | 38,0 | 35,0 | 32,0 | 29,0 | 25,0 | 15,0 | ||||||
| 2,20 | 3,00 | — | 67,0 | 61,0 | 60,0 | 59,0 | 57,0 | 56,0 | 54,0 | 50,0 | 46,0 | 41,0 | 36,0 | 21,0 | ||||||
| 3,00 | 4,00 | — | 100,0 | 91,0 | 90,0 | 88,0 | 86,0 | 84,0 | 81,0 | 75,0 | 69,0 | 61,0 | 54,0 | 31,0 | ||||||
| 3,70 | 5,00 | — | 120,0 | 110,0 | 108,0 | 106,0 | 103,0 | 101,0 | 98,0 | 90,0 | 82,0 | 74,0 | 64,0 | 38,0 | ||||||
| 4,00 | 5,50 | — | 133,0 | 122,0 | 119,0 | 117,0 | 115,0 | 113,0 | 107,0 | 100,0 | 91,0 | 82,0 | 71,0 | 42,0 | ||||||
| 5,50 | 7,50 | — | 173,0 | 158,0 | 155,0 | 152,0 | 149,0 | 146,0 | 140,0 | 130,0 | 119,0 | 106,0 | 93,0 | 54,0 | ||||||
| 7,50 | 10,00 | — | 233,0 | 213,0 | 209,0 | 205,0 | 201,0 | 197,0 | 188,0 | 175,0 | 160,0 | 143,0 | 125,0 | 73,0 | ||||||
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7.2 | 8.4 | 9.6 | 10.8 | 12 | 15 | 18 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | 180 | 200 | 250 | 300 | |
| 1,10 | 1,50 | — | 26,0 | 24,0 | 24,0 | 23,0 | 23,0 | 22,0 | 20,0 | 19,0 | 17,0 | 13,0 | 8,0 | ||||||||
| 1,50 | 2,00 | — | 39,0 | 36,0 | 36,0 | 35,0 | 34,0 | 32,0 | 30,0 | 28,0 | 26,0 | 19,0 | 12,0 | ||||||||
| 2,20 | 3,00 | — | 58,0 | 54,0 | 53,0 | 53,0 | 51,0 | 48,0 | 46,0 | 42,0 | 39,0 | 29,0 | 18,0 | ||||||||
| 3,00 | 4,00 | — | 77,0 | 72,0 | 71,0 | 70,0 | 68,0 | 65,0 | 61,0 | 56,0 | 52,0 | 39,0 | 24,0 | ||||||||
| 3,70 | 5,00 | — | 90,0 | 86,0 | 84,0 | 83,0 | 80,0 | 77,0 | 72,0 | 67,0 | 60,0 | 45,0 | 28,0 | ||||||||
| 4,00 | 5,50 | — | 103,0 | 96,0 | 95,0 | 94,0 | 90,0 | 86,0 | 81,0 | 75,0 | 69,0 | 52,0 | 32,0 | ||||||||
| 5,50 | 7,50 | — | 142,0 | 132,0 | 130,0 | 129,0 | 124,0 | 118,0 | 112,0 | 103,0 | 95,0 | 71,0 | 44,0 | ||||||||
| 7,50 | 10,00 | — | 187,0 | 174,0 | 172,0 | 170,0 | 164,0 | 156,0 | 147,0 | 136,0 | 125,0 | 94,0 | 58,0 | ||||||||
| 9,30 | 12,50 | — | 218,0 | 200,0 | 197,0 | 195,0 | 185,0 | 175,0 | 169,0 | 152,0 | 140,0 | 98,0 | 55,0 | ||||||||
Select a model in the following table to highlight its corresponding curve. The table contains the same values as the chart.
Select a model to highlight its corresponding curve.
Scroll horizontally to view all values. The “Model” column remains visible.
| Model | Motor Details | H (m) · Q (m³/h) H (m) · Q (l/min) | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kW | HP | Amp (1~/3~) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 7.2 | 8.4 | 9.6 | 10.8 | 12 | 15 | 18 | |
| kW | HP | Amp (1~/3~) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | 180 | 200 | 250 | 300 | |
| 1,50 | 2,00 | — | 30,0 | 27,0 | 27,0 | 26,0 | 25,0 | 24,0 | 23,0 | 19,0 | 14,0 | 8,0 | |||||||||
| 2,20 | 3,00 | — | 47,0 | 43,0 | 43,0 | 42,0 | 40,0 | 39,0 | 37,0 | 30,0 | 22,0 | 13,0 | |||||||||
| 3,00 | 4,00 | — | 59,0 | 54,0 | 54,0 | 53,0 | 50,0 | 49,0 | 46,0 | 38,0 | 28,0 | 16,0 | |||||||||
| 3,70 | 5,00 | — | 71,0 | 65,0 | 64,0 | 62,0 | 60,0 | 58,0 | 56,0 | 46,0 | 34,0 | 20,0 | |||||||||
| 4,00 | 5,50 | — | 83,0 | 76,0 | 76,0 | 74,0 | 70,0 | 68,0 | 65,0 | 53,0 | 39,0 | 23,0 | |||||||||
| 5,50 | 7,50 | — | 107,0 | 98,0 | 98,0 | 95,0 | 90,0 | 88,0 | 83,0 | 69,0 | 51,0 | 29,0 | |||||||||
| 7,50 | 10,00 | — | 148,0 | 136,0 | 136,0 | 131,0 | 125,0 | 122,0 | 116,0 | 95,0 | 70,0 | 41,0 | |||||||||
| 9,30 | 12,50 | — | 176,0 | 160,0 | 156,0 | 152,0 | 148,0 | 140,0 | 133,0 | 105,0 | 77,0 | 43,0 | |||||||||
